- Home
- »
- Our Products
- »
Cut Wire Shots
Leading Manufacturer of stainless steel cut wire shots, carbon steel cut wire shots, zinc cut wire shots, aluminum cut wire shots, copper cut wire shots and brass cut wire shots from Jodhpur.Stainless Steel Cut Wire Shots
Get Best Quote
Approx. Price: Rs 250 / KilogramGet Latest Price
Available in SS 200, 300 and 400 Series as per customer’s requirements from size ranging from 0.4mm to 1.6mm in As Cut , Semi Conditioned and Fully Conditioned Shots.
Advantages:
Applications :
Available as per following Specifications:
Available Shapes:
Product Details:
| Size | 0.8 mm |
| Material | GOOD |
| Shape | Round |
| Color | silver |
| Application | Automobile Industry |
| Brand | Synco |
| Hardness | yes |
| Surface Finish | plane |
| Country of Origin | Made in India |
Available in SS 200, 300 and 400 Series as per customer’s requirements from size ranging from 0.4mm to 1.6mm in As Cut , Semi Conditioned and Fully Conditioned Shots.
Advantages:
- Most economical and lowest consumption
- Consumption 3-4 times less compare to cast shot
- No dust formation
- Faster cleaning
- Environmental friendly
- Uniform hardness
- Stabilized grain size
- Increased fatigue life of blasted parts
Applications :
- Surface finishing
- Obtain profile pattern
- Shot peening
- Shot blasting
- Grit removal
- Pre treatment
- Rust removal
- Blast cleaning
Available as per following Specifications:
- SAE : J441
- As- Cut : Cylindrical
- Normal : Corners Pre Rounded
- Conditioned : Almost Spherical
- Semi conditioned : not spherical
Available Shapes:
- As- Cut : Cylindrical
- Normal : Corners Pre Rounded
- Conditioned : Almost Spherical
- Semi conditioned : not spherical
Chemical Composition:
| Grade | Carbon (Max) | Manganese(MIN-Max) | Chromium (Min-Max) | Nickle | Silicon(max) | Phosphorous(max) | Sulfur(max) |
| 304 | 0.08 | 2 | 18-20 | 8 | 1 | 0.075 | 0.03 |
| 302 | 0.15 | 2 | 17-19 | 8 | 1 | 0.045 | 0.03 |
| 430 | 0.03 | 1 | 16-18 | Nil | 1 | 0.04 | 0.03 |
Available Sizes:
| SAE | S-170 | S-190 | S-230 | S-280 | S-280 | S-360 | S-390 | S-460 | S-550 | S-660 |
| Equivalent Size in mm | 0.4 | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 | 1 | 1.2 | 1.4 | 1.6 |
| Cut Wire Shot range in mm | 0.3 -0.5 | 0.4 -0.60 | 0.5- 0.7 | 0.6-0.8 | 0.7-0.9 | 0.8-1.1 | 0.8- 1.2 | 1-1.4 | 1.2-1.6 | 1.4-1.8 |
Request
Callback
Callback
Yes! I am Interested
Carbon Steel Cut Wire Shots
Get Best Quote
Approx. Price: Rs 80 / KilogramGet Latest Price
We offer a complete range of Carbon Steel Cut Wire in both Grade II and III confiriming to international specifications in sizes ranging from 0.4mm to 1.6mm.
Features:
Hardness Range:
Difference between Steel Cut Wire Shot Carbon Steel Cut Wire Shot:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Size | 0.8 mm |
| Material | good |
| Shape | Round |
| Color | grey |
| Cut Wire Design | yes |
| Grits Design | yes |
| Standards | yes |
| Surface Finish | good |
We offer a complete range of Carbon Steel Cut Wire in both Grade II and III confiriming to international specifications in sizes ranging from 0.4mm to 1.6mm.
Features:
- Corrosion resistance
- Prolonged Service Life
- Good abrasion
- Highly durable
Hardness Range:
- Carbon Steel: 1070
- Regular: HRC 45-50
- Standard: HRC 50-55
- High: HRC 55-60
Difference between Steel Cut Wire Shot Carbon Steel Cut Wire Shot:
| Cast Steel Shot | Cut Wire Steel Shot |
| Basic Raw Material is far Lower in Physical properties Composition. This cause BLOW HOLES, POROSITY SHRINKAGE, which makes the shot FRACTURE into SMALL PARTICLES | Raw Material is of EXACT Composition without any material defects or HOLES ***OROSITY |
| Grain size of cast shot is UNSTABILIZED | Due to its Drawing process, the grain size is STABILIZED |
| Shot being produced are of mixed size, hence product is a mix of various spherical sizes | All cut wire shot being out of same wire, hence are IDENTICAL |
| Hardness variation is large | Uniform hardness |
| In Micro-structure Carbide always there | Micro-Structure is only Tempered . Martensite |
| Steel Shot break in-to Dust | Cut wire shot only WEAR DOWN |
| Higer Consumption requires high Inventory, more Money Space as well | Lower Inventory requires , for the SAME job |
| Shot consumption is higher | Less Consumption than Cast Shot |
| Increases Working Cycle Time, due to higher consumption in shot blasting/peening | Reduce time for shot blasting / peening |
| No Consistency in performance, due to fast deterioration in Size | Consistent Performance |
| Less usage life | Usage life is 2-3 times more |
| Lower Purchase Price | Higher Purchase Price |
Request
Callback
Callback
Yes! I am Interested
Zinc Cut Wire Shots
Get Best Quote
Approx. Price: Rs 450 / KilogramGet Latest Price
Product Brochure
We manufacture complete range of Zn Cut Wire Shots in size ranging from 0.4mm to 1.6mm size in both As cut and Conditioned form. We have ready stocks of various sizes available with us.
Product Description:
We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes.
Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashing of non ferrous components. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot.
Deburring and deflashing of aluminium and zinc castings and die-castings. Removal of sand from sand castings. Removal of parting lines and stains from non ferrous castings. Removal of water wrinkle from aluminium die castings and providing a luster satin type finish. Zinc Cut Wire provides temporary corrosion protection to ferrous parts blasted with it. A very thin layer, up to 1.3μm thick is deposited onto the surface of the part.
Specifications:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Size | 0.6 to 2.0mm |
| Material | Zinc Cut Wire Shots |
| Brand | SYNCO |
| Packaging Type | Polybag Packing |
| Cut Wire Design | As cut or Conditioned |
| Country of Origin | Made in India |
We manufacture complete range of Zn Cut Wire Shots in size ranging from 0.4mm to 1.6mm size in both As cut and Conditioned form. We have ready stocks of various sizes available with us.
Product Description:
We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes.
Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashing of non ferrous components. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot.
Deburring and deflashing of aluminium and zinc castings and die-castings. Removal of sand from sand castings. Removal of parting lines and stains from non ferrous castings. Removal of water wrinkle from aluminium die castings and providing a luster satin type finish. Zinc Cut Wire provides temporary corrosion protection to ferrous parts blasted with it. A very thin layer, up to 1.3μm thick is deposited onto the surface of the part.
Specifications:
| Abrasive | ZINC CUT WIRE |
| Chemical Composition | Zn 99.99% or up |
| Fe 0.005% or less | |
| Hardness | 36-51 HV |
| Available Size | 0.6 x 0.6 mm |
| 0.8 x 0.8 mm | |
| 1.0 x 1.0 mm | |
| 1.2 x 1.2 mm | |
| 2.5 x 2.5 mm | |
| 3.0 x 3.0 mm |
Request
Callback
Callback
Additional Information:
- Production Capacity: 10 Tons per month
- Delivery Time: 3-4 weeks
Yes! I am Interested
Aluminum Cut Wire Shots
Get Best Quote
Approx. Price: Rs 200 / KilogramGet Latest Price
Our company is professional manufacturer of Aluminum Cut Wire Shots for Customer’s specific requirements. Details are given below.
Advantages:
Applications:
Available Shapes:
Advantages:
- Most economical and lowest consumption
- Consumption 3-4 times less compare to cast shot
- No dust formation
- Faster cleaning
- Environmental friendly
- Uniform hardness
- Stabilized grain size
- Increased fatigue life of blasted parts
Applications:
- Surface finishing
- Obtain profile pattern
- Shot peening
- Shot blasting
- Grit removal
- Pre treatment
- Rust removal
- Blast cleaning
Available Shapes:
- As- Cut: Cylindrical
- Normal: Corners Pre Rounded
- Conditioned: Almost Spherical
- Semi conditioned: not
Available Sizes:
| SAE | S-170 | S-190 | S-230 | S-280 | S-330 | S-360 | S-390 | S-460 | S-550 | S-660 |
| Equivalent sizes in mm | 0.4 | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 | 1 | 1.2 | 1.4 | 1.6 |
| Cut Wire Shot range in mm | 0.3 -0.5 | 0.4 -0.60 | 0.5- 0.7 | 0.6-0.8 | 0.7-0.9 | 0.8-1.1 | 0.8- 1.2 | 37987 | 1.2-1.6 | 1.4-1.8 |
Hardness:
| Type of Material | Material Used | HRB |
| Aluminum | Wire Types4043-5356 full hard Wire Types 1100-1350 full hard | 40-70 20-40 |
Request
Callback
Callback
Additional Information:
- Minimum Order Quantity: 100 Kilogram
Yes! I am Interested
Copper Cut Wire Shots
Get Best Quote
Approx. Price: Rs 350 / KilogramGet Latest Price
We manufacture Copper Cut Wire Shot as per VDFI 8001 in a competitive price. Copper shot is mainly applied to surface polishing, peening, and color processing of valve, electric fittings, ornaments and other work pieces.
Features:
We can customize these cut wire shots on the basis of size and design as per the requirement of our clients.
Applications:
Features:
- Dimensionally accurate
- Good abrasion - improves work efficiency
- Highly durable - reduces manufacturing time and cost
- Stable peening effect because of uniform hardness and particles
We can customize these cut wire shots on the basis of size and design as per the requirement of our clients.
Applications:
| Abrasive | Copper Cut Wire |
| Chemical Composition | Cu 99.0% |
| Other 1.0% | |
| Hardness | 180-205 HV. |
| Density | 8.60 g./cc. |
| Available Size | 2.50 mm. |
| 3.00 mm. |
Request
Callback
Callback
Yes! I am Interested
Brass Cut Wire Shots
Get Best Quote
Approx. Price: Rs 300 / KilogramGet Latest Price
We are also engaged in manufacturing, supplying, trading and exporting a wide range of Brass Cut Wire Shots. These products are made up of superior components sourced from trust worthy dealers of the industry. All these products are quality tested and checked on various parameters and are authorized as per the international standards.
Features:
Specifications:
Features:
- Long lasting
- Reliable
Specifications:
- Material: Brass
- Size: 0.3 - 0.8 mm
- Hardness: 180-205 HV
Request
Callback
Callback
Yes! I am Interested
